Skip to main content

Gas fryer with cabinet „Berto's“ GL20+20M (20+20 L)

Add to Cart
  • Gas fryer with cabinet „Berto's“ GL20+20M (20+20 L)
  • Gas fryer with cabinet „Berto's“ GL20+20M (20+20 L)

Berto's

Italian manufacturer • Over 50 years

For more than 50 years „Berto's“ has set out to give chefs the very best. The Italian company designs its cookers and other kitchen equipment with close attention to ergonomics, comfort, strength and safety.

MB „Restoranų įranga“ is the official distributor of „Berto's“ S.p.A. in Lithuania.

Strength

Built to last

„Berto's“ cookers are made from the best steel and tested to last for years, and every product undergoes a strict inspection before it is sold.

Innovation

Over 50 new products a year

The „BERTO'S Lab“ research laboratory develops technology for reliability, safety, hygiene and lower consumption, and „Berto's“ launches more than 50 new products every year.

Efficiency

Saves energy

Excellent thermal insulation and precise energy delivery mean „Berto's“ equipment saves energy and is kinder to the environment.

Gas fryer with cabinet „Berto's“ GL20+20M (20+20 L)

Two 20 L tanks and up to 50 kg of fried food an hour

This „Berto's“ Macros 700 gas fryer with cabinet has two independent 20 L tanks and 33 kW of total heat input in a unit 800 mm wide.

You are ready to fry 10 minutes after lighting the fryer: that is all the oil needs to heat from 20 to 190 °C. An average batch then takes 6 minutes.

You fry two different foods at once, each at its own temperature, because each tank has its own controls. On quieter shifts you heat just one tank and save gas.

Safety is built in: if the flame goes out, the flame failure device (a thermocouple valve) cuts off the gas, and the safety thermostat stops the oil from overheating. You light each tank's protected pilot with its silicone-covered piezo button.

„Berto's“ GL20+20M gas fryer with cabinet and baskets

Oil that lasts longer

You change the oil less often and save money: the oil stays fresh for longer, and food debris settles in the wide cold zone formed by the shaped bottom of each tank.

You fry each food at the temperature it needs: each tank's seven-position thermostat knob covers 110 to 190 °C, and because the temperature is sensed directly in the tank, the setting is precise.

When a fresh batch goes in, the temperature recovers quickly. The tubular burners with a honeycomb section spread the heat over a large surface, so the oil heats evenly, without hot spots.

The tanks are easy to keep hygienically clean: they are pressed and fully rounded.

„Berto's“ GL20+20M fryer tanks with baskets

Comparison

Model„Berto's“ GL20+20M
this model
„Berto's“ GL20M„Berto's“ GL15+15M
SeriesMacros 700Macros 700Macros 700
Capacity2 × 20 L20 L2 × 15 L
Power33 kW16.5 kW25.4 kW
Outputup to 50 kg/hup to 25 kg/hup to 36 kg/h
Dimensions (W × D × H)800 × 714 × 900 mm400 × 714 × 900 mm800 × 714 × 900 mm

The GL20+20M is the one to choose when you need the highest output of all our gas fryers. For a single 20 L tank, choose the GL20M; if two 15 L tanks are enough, the GL15+15M.

Gas supply and installation

The fryer runs on natural gas (G20, G25) or LPG (G30/G31). The gas connection is R ½″ (UNI ISO 7/1). The fryer must be connected to the gas supply by a qualified gas engineer.

The fryer takes up 800 × 714 mm and is 900 mm high to its top surface (1,070 mm overall). Its depth matches the rest of the Macros 700 range, so it lines up neatly with Macros 700 cookers and other appliances. Height-adjustable feet let you level it on the floor.

What’s included and optional extras

The fryer comes with two full-size baskets (265 × 345 × 150 mm each) and tank protection grids. For an extra charge it is available with two (C2/20) or four (C4/20) half-size baskets: you fry several different foods at once and lift each basket out when its batch is ready. To add them, tick ‘Two half-size baskets (C2/20)’ or ‘Four half-size baskets (C4/20)’ under ‘Options’.

Technical specifications

Manufacturer„Berto's“
SeriesMacros 700
ModelGL20+20M
Manufacturer code17480000
Typegas fryer with cabinet and two independent tanks
Capacity2 × 20 L
Tank dimensions402 × 302 × 340 mm (each)
Baskets2 full-size baskets, 265 × 345 × 150 mm each; 2 or 4 half-size baskets (C2/20, C4/20) available at extra cost
Outputup to 50 kg/h (average frying time 6 min)
Heat-up time10 min (from 20 to 190 °C)
Power33 kW (28,380 kcal/h)
Burnerstubular, honeycomb section
Gas typenatural gas (G20, G25) or LPG (G30/G31)
Gas consumption (G20)3.49 m³/h
Gas consumption (G25)4.06 m³/h
Gas consumption (G30/G31)2.60 kg/h
Gas connectionR ½″ (UNI ISO 7/1)
Temperature range110–190 °C
Controlsmanual, separate 7-position thermostat knob for each tank
Ignitionpiezo, silicone-covered button for each tank
Cold zonewide, collects food debris
Overheating protectionsafety thermostat
Flame failure devicegas valve with thermocouple
Pilot lightprotected
Supplied with2 full-size baskets, tank protection grids
MaterialAISI 304 stainless steel (top and front panels)
Feetheight-adjustable
Dimensions (W × D × H)800 × 714 × 900 mm (height to top surface; overall height 1,070 mm)
Packed dimensions880 × 790 × 1,210 mm
Weight63 kg (73 kg packed)
ComplianceCE
Country of originItaly
Fryer
Manufacturer „Berto's“
Series Macros 700
Model GL20+20M
Manufacturer code 17480000
Type gas fryer with cabinet and two independent tanks
Capacity 2 × 20 L
Tank dimensions 402 × 302 × 340 mm (each)
Baskets 2 full-size baskets, 265 × 345 × 150 mm each; 2 or 4 half-size baskets (C2/20, C4/20) available at extra cost
Output up to 50 kg/h (average frying time 6 min)
Heat-up time 10 min (from 20 to 190 °C)
Power 33 kW (28,380 kcal/h)
Burners tubular, honeycomb section
Gas type natural gas (G20, G25) or LPG (G30/G31)
Gas consumption (G20) 3.49 m³/h
Gas consumption (G25) 4.06 m³/h
Gas consumption (G30/G31) 2.60 kg/h
Gas connection R ½″ (UNI ISO 7/1)
Temperature range 110–190 °C
Controls manual, separate 7-position thermostat knob for each tank
Ignition piezo, silicone-covered button for each tank
Cold zone wide, collects food debris
Overheating protection safety thermostat
Flame failure device gas valve with thermocouple
Pilot light protected
Supplied with 2 full-size baskets, tank protection grids
Material AISI 304 stainless steel (top and front panels)
Feet height-adjustable
Dimensions (W × D × H) 800 × 714 × 900 mm (height to top surface; overall height 1,070 mm)
Packed dimensions 880 × 790 × 1,210 mm
Weight 63 kg (73 kg packed)
Compliance CE
Country of origin Italy
Manufacturer product page: Open manufacturer page

Write your review

Manufacturer:
Berto's
Code:
17480000
3,571.90 € (Excl. VAT)
Options