Skip to main content

Potato peeler „Fama Industrie“ 5 kg with stand

Add to Cart
  • Potato peeler „Fama Industrie“ 5 kg with stand
  • Potato peeler „Fama Industrie“ 5 kg with stand
  • Potato peeler „Fama Industrie“ 5 kg with stand
  • Potato peeler „Fama Industrie“ 5 kg with stand

Potato peeler „Fama Industrie“ 5 kg with stand

5 kg potato peeler with waste filter drawer

This machine peels up to 150 kg of potatoes an hour, taking 60–90 seconds for a 5 kg load. That is plenty for cafés, pizzerias, pubs and small restaurant kitchens.

The machine sits on a stand with a pull-out waste filter drawer that catches the peelings before they reach the drain. The overall height, including the stand, is 720 mm.

The body is made of AISI 304 stainless steel. A fan-cooled, Italian-made 0.37 kW asynchronous motor drives the disc through a belt.

Potato peeler „Fama Industrie“ 5 kg with stand

Abrasive disc and abrasive belt

The potatoes are peeled by the spinning abrasive disc and by the drum walls, which are lined with an abrasive belt. The disc turns at 270 rpm, while water fed through a solenoid valve rinses the peelings away.

The abrasive belt can be replaced without tools, and the abrasive parts are designed to make the machine easy to use, clean and maintain. Look for replacement abrasive discs and abrasive belts in the ‘Potato peeler spare parts’ category.

Abrasive belt of a „Fama Industrie“ potato peeler

Digital controls and safety

The control panel has a multifunction digital timer: set the peeling time with the + and − buttons and read it on the display. The electrics are housed in a separate insulated plastic box.

The lid is unbreakable clear plastic, so you can watch the peeling without opening the machine. A safety microswitch stops the machine when the lid is opened.

Digital control panel with timer on a „Fama Industrie“ potato peeler

Installation

Connect the water supply with a 3/4″ flexible hose; the water temperature should be 5–20 °C. Waste water can go to a wall drain (Ø 50 mm side outlet) or a floor drain (Ø 40 mm bottom outlet). The machine is built for a three-phase 400 V or a single-phase 230 V supply — select yours under ‘Electrical voltage’.

What’s included

The machine comes with an abrasive disc, an abrasive belt, a clear plastic lid and a waste filter drawer. A stainless steel lid is available at extra cost — tick it under ‘Options’.

We sell four versions of the 5 kg „Fama Industrie“ peeler: benchtop, on legs, with stand and with high stand. They all peel the same way; what differs is the height, the weight, the drain outlets and whether there is a waste filter drawer.

Technical specifications

Manufacturer„Fama Industrie“
Manufacturer codeFP107 (400 V), FP106 (230 V)
Versionwith stand and waste filter drawer
Maximum load5 kg
Outputup to 150 kg/h
Peeling cycle60–90 s
Disc speed270 rpm
Power supply400 V three-phase or 230 V single-phase, 50 Hz
Motor power0.37 kW (0.5 HP)
Motorasynchronous, fan-cooled, made in Italy
Drivebelt
Abrasive surfacesabrasive disc and abrasive belt (belt replaceable without tools)
Control paneldigital, with multifunction timer
Lidunbreakable clear plastic (stainless steel optional extra)
Safetymicroswitch on the lid
Waste filter draweryes
Drain outletØ 50 mm side outlet (wall drain) or Ø 40 mm bottom outlet (floor drain)
Water connection3/4″ flexible hose, with solenoid valve
Water temperature5–20 °C
BodyAISI 304 stainless steel
Dimensions (W × D × H)530 × 530 × 720 mm
Net weight35 kg
Gross weight43 kg
ComplianceCE
Country of originItaly
Potato peeler
Manufacturer „Fama Industrie“
Manufacturer code FP107 (400 V), FP106 (230 V)
Version with stand and waste filter drawer
Maximum load 5 kg
Output up to 150 kg/h
Peeling cycle 60–90 s
Disc speed 270 rpm
Power supply 400 V three-phase or 230 V single-phase, 50 Hz
Motor power 0.37 kW (0.5 HP)
Motor asynchronous, fan-cooled, made in Italy
Drive belt
Abrasive surfaces abrasive disc and abrasive belt (belt replaceable without tools)
Control panel digital, with multifunction timer
Lid unbreakable clear plastic (stainless steel optional extra)
Safety microswitch on the lid
Waste filter drawer yes
Drain outlet Ø 50 mm side outlet (wall drain) or Ø 40 mm bottom outlet (floor drain)
Water connection 3/4″ flexible hose, with solenoid valve
Water temperature 5–20 °C
Body AISI 304 stainless steel
Dimensions (W × D × H) 530 × 530 × 720 mm
Net weight 35 kg
Gross weight 43 kg
Compliance CE
Country of origin Italy
Manufacturer product page: Open manufacturer page

Write your review

Manufacturer:
Fama Industrie
Code:
FP107/FP106
1,377.18 € (Excl. VAT)
Electrical voltage
Options