Skip to main content

6-plate electric cooker with electric oven „Berto's“ HIGH POWER E7P6+FE

Add to Cart
  • 6-plate electric cooker with electric oven „Berto's“ HIGH POWER E7P6+FE
  • 6-plate electric cooker with electric oven „Berto's“ HIGH POWER E7P6+FE
  • 6-plate electric cooker with electric oven „Berto's“ HIGH POWER E7P6+FE

Berto's

Italian manufacturer • Over 50 years

For more than 50 years „Berto's“ has set out to give chefs the very best. The Italian company designs its cookers and other kitchen equipment with close attention to ergonomics, comfort, strength and safety.

MB „Restoranų įranga“ is the official distributor of „Berto's“ S.p.A. in Lithuania.

Strength

Built to last

„Berto's“ cookers are made from the best steel and tested to last for years, and every product undergoes a strict inspection before it is sold.

Innovation

Over 50 new products a year

The „BERTO'S Lab“ research laboratory develops technology for reliability, safety, hygiene and lower consumption, and „Berto's“ launches more than 50 new products every year.

Efficiency

Saves energy

Excellent thermal insulation and precise energy delivery mean „Berto's“ equipment saves energy and is kinder to the environment.

6-plate electric cooker with electric oven „Berto's“ HIGH POWER E7P6+FE

HIGH POWER: six hotplates and a GN 2/1 oven

Built for busy restaurant, hotel and catering kitchens: six cast iron hotplates, a spacious GN 2/1 electric oven and an open compartment beside it.

The cooker has a total rating of 23.1 kW: six round 2.6 kW hotplates (Ø 220 mm) and a 7.5 kW oven. The cast iron plates heat up to 400 °C and are just as good at bringing large quantities of water to the boil as at keeping food hot.

The worktop and front panels are made of AISI 304 stainless steel. The oven is on the left, with an open compartment to its right, and the whole cooker stands on height-adjustable feet.

6-plate electric cooker with electric oven „Berto's“ HIGH POWER E7P6+FE

6-position switches and safety thermostats

Each hotplate has its own 6-position switch, so the power can be adjusted in steps, from the lowest setting to full power. According to the manufacturer, this direct way of controlling the heat also saves energy.

Each plate has a built-in safety thermostat to prevent overheating. Indicator lights on the control panel show when the cooker is live and when the hotplates are on.

Cast iron hotplates and 6-position switches

Static GN 2/1 oven with grill function

The oven chamber is made entirely of stainless steel and has four shelf positions for GN 2/1 grids or trays (530 × 650 mm). As a static oven it has no fan: the heating elements are at the top and bottom, and the thermostat can be set anywhere from 50 to 270 °C. The top element doubles as a salamander-style grill for browning dishes from above.

The door is pressed from AISI 304 stainless steel inside and out, and has a sturdy handle made of 2 mm AISI 304 steel. Two indicator lights show that the oven is on and that it has reached the set temperature.

GN 2/1 electric oven, open compartment and control panel

Sealed one-piece worktop

The worktop is pressed from a single sheet of stainless steel, with the hotplates sealed into it.

Spills cannot seep inside, so the cooker is quick to clean and easy to look after — essential in kitchens with strict hygiene standards.

Top view: six cast iron hotplates set into the stainless steel worktop

Electrical supply and installation

The cooker runs on a 380–415 V three-phase and neutral supply (3N~) and has a total rating of 23.1 kW. The electrical connection is underneath the cooker, 42 mm from the left-hand side and 359 mm from the front edge. The cooker must be connected to the mains by a qualified electrician.

What’s included and optional extras

The cooker comes with one anti-tilt oven shelf. The open compartment beside the oven can be fitted with a door (1P DX, with a handle) — just tick the box under “Options”.

Technical specifications

Manufacturer„Berto's“
SeriesMacros 700 (HIGH POWER)
ModelE7P6+FE
Manufacturer code18725000
Hotplates6 × 2.6 kW, round, cast iron
Hotplate diameter220 mm
Hotplate temperatureup to 400 °C
Power control6-position switch for each hotplate
Overheat protectionsafety thermostat in every hotplate
Ovenstatic electric (no fan) with grill function; 4 shelf positions for GN 2/1 grids or trays (530 × 650 mm)
Oven power7.5 kW (4.5 kW and 3 kW heating elements)
Oven temperature50–270 °C, thermostatically controlled
Oven chamberall stainless steel
Oven doorpressed AISI 304 stainless steel inside and out; sturdy handle of 2 mm AISI 304 steel
Total power23.1 kW
Power supply380–415 V, three-phase and neutral (3N~)
Indicator lightshob — mains-on and hotplate-on lights; oven — oven-on and temperature-reached lights
Worktoppressed from a single sheet of AISI 304 stainless steel; hotplates sealed in
Front panelsAISI 304 stainless steel
Installation typefree-standing, on height-adjustable feet
Open compartmenton the right, next to the oven; 1P DX door available at extra cost
Dimensions (W × D × H)1,200 × 714 × 900 mm (height to worktop; overall height 1,040 mm)
Packed dimensions1,290 × 790 × 1,210 mm
Net weight129 kg
Gross weight130 kg
Supplied withone anti-tilt oven shelf
ComplianceCE
Country of originItaly
Electric cooker
Manufacturer „Berto's“
Series Macros 700 (HIGH POWER)
Model E7P6+FE
Manufacturer code 18725000
Hotplates 6 × 2.6 kW, round, cast iron
Hotplate diameter 220 mm
Hotplate temperature up to 400 °C
Power control 6-position switch for each hotplate
Overheat protection safety thermostat in every hotplate
Oven static electric (no fan) with grill function; 4 shelf positions for GN 2/1 grids or trays (530 × 650 mm)
Oven power 7.5 kW (4.5 kW and 3 kW heating elements)
Oven temperature 50–270 °C, thermostatically controlled
Oven chamber all stainless steel
Oven door pressed AISI 304 stainless steel inside and out; sturdy handle of 2 mm AISI 304 steel
Total power 23.1 kW
Power supply 380–415 V, three-phase and neutral (3N~)
Indicator lights hob — mains-on and hotplate-on lights; oven — oven-on and temperature-reached lights
Worktop pressed from a single sheet of AISI 304 stainless steel; hotplates sealed in
Front panels AISI 304 stainless steel
Installation type free-standing, on height-adjustable feet
Open compartment on the right, next to the oven; 1P DX door available at extra cost
Dimensions (W × D × H) 1,200 × 714 × 900 mm (height to worktop; overall height 1,040 mm)
Packed dimensions 1,290 × 790 × 1,210 mm
Net weight 129 kg
Gross weight 130 kg
Supplied with one anti-tilt oven shelf
Compliance CE
Country of origin Italy
Manufacturer product page: Open manufacturer page

Write your review

Manufacturer:
Berto's
Code:
18725000
3,024.75 € (Excl. VAT)
Options