Skip to main content

Stainless steel meat mincer „Fama Industrie“ TI 32 RS Unger (FTI138RSUT)

Add to Cart
  • Stainless steel meat mincer „Fama Industrie“ TI 32 RS Unger (FTI138RSUT)
  • Stainless steel meat mincer „Fama Industrie“ TI 32 RS Unger (FTI138RSUT)
  • Stainless steel meat mincer „Fama Industrie“ TI 32 RS Unger (FTI138RSUT)

Fama Industrie

Italian manufacturer • Over 50 years

For more than 50 years „Fama Industrie“ has been building professional food preparation equipment, designing and making every machine in Italy. Precise craftsmanship, carefully selected materials and a design that pairs function with good looks ensure high quality.

MB „Restoranų įranga“ is the official distributor of „Fama Industrie“ S.r.l. in Lithuania.

Durability

Built for intensive use

„Fama Industrie“ machines are engineered not only to perform well but to withstand years of intensive professional use, making them a long-term investment in reliability.

Customisation

Tailored to your business

„Fama Industrie“ can adapt the colour, technical details and configuration so that the equipment suits the style and day-to-day needs of your kitchen.

Worldwide

Recognised worldwide

„Fama Industrie“ machines are exported all over the world, bringing Italian quality, reliability and ingenuity to professionals everywhere.

Stainless steel meat mincer „Fama Industrie“ TI 32 RS Unger (FTI138RSUT)

For fine, even mince

The Total Unger system with three plates and two knives produces a fine, even mince — the kind you need for frankfurters, for example.

The entire body is polished stainless steel, so the mincer is sturdy, hygienic and easy to clean.

„Fama Industrie“ TI 32 RS Unger stainless steel meat mincer with tray

Who it is for

The mincer is designed for heavy use in any butcher’s shop or professional kitchen: you mince fresh, boneless meat for meat sauces, burgers, meatballs and sausages.

At the maximum output the manufacturer quotes (500 kg/h), you mince 50 kg of meat in about six minutes (our calculation).

Total Unger mincing system

The mince comes out evenly ground: the pre-cutter gives the meat a first, coarse cut, and the 10 mm and 6 mm plates with two double-edged knives mince it further.

After work you quickly strip the head down and wash all its parts, in the dishwasher too. The barrel, screw and ring nut are made of AISI 304 stainless steel, and all three plates and both self-sharpening knives are stainless steel too.

„Fama Industrie“ TI 32 RS Unger head parts: barrel, screw, three plates, two knives and ring nut

Dependable drive, safe controls

The drive runs smoothly and quietly and lasts a long time: hardened steel gears turn in an oil bath inside a sealed gearbox.

The fan-cooled asynchronous motor has overheating protection and suits long or particularly intensive use. The controls operate at a safe 24 V.

Which model to choose

  • TI 32 RS Unger (this model) — a #32 Total Unger mincer for a fine, uniform mince: 1.6 kW, up to 500 kg/h, a polished stainless steel body.
  • For 600 kg/h, a 230 V version, or reverse and a hopper safety device as standard — the TI 32 R Unger with a 2.2 kW motor.
  • When one plate and one knife are enough — the TI 32 R with an Enterprise system (2.2 kW, up to 600 kg/h).
  • When 300 kg/h is enough — the TS 22 ½ Unger: a ½ Unger #22 system with two plates and a 1.1 kW motor.
ModelTI 32 RS Unger
this model
TI 32 R UngerTI 32 R
Plate and knife systemUnger: 3 plates, 2 knivesUnger: 3 plates, 2 knivesEnterprise: 1 plate, 1 knife
Motor power1.6 kW2.2 kW2.2 kW
Outputup to 500 kg/hup to 600 kg/hup to 600 kg/h
Power supply400 V400 V or 230 V400 V or 230 V
Reverse functionoptional extrayesyes
Feed openingØ 52 mmØ 52 mmØ 52 mm (Ø 76 mm optional extra)
Net weight40 kg48 kg (230 V — 54 kg)46 kg (230 V — 52 kg)

Installation and connections

  • Power: three-phase 400 V, 50 Hz. The supply line must be protected by a residual current device (RCD) in line with local regulations.
  • First start-up: the mincer is commissioned by an electrician, who checks which way the screw turns.
  • Location: a sturdy food-preparation worktop 900–1,100 mm high. The mincer is stable enough to stand freely on the worktop.
  • Protection rating IPX3; noise level below 70 dB(A).
  • Dimensions and weight: 215 × 480 × 430 mm (W × D × H), 40 kg; packed — 430 × 620 × 650 mm, 43 kg.

Running costs and spare parts

The gearbox oil never needs topping up or changing. Spare Unger #32 knives are available separately.

What’s included

The mincer comes with two double-edged knives, three plates (pre-cutter, 10 mm and 6 mm), a stainless steel tray and hopper, and a food-grade ABS pusher. You can order the reverse function (FINV) together with the mincer — select it under “Options”. A sausage-filling kit is also available separately.

Technical specifications

Manufacturer„Fama Industrie“
ModelTI 32 RS Unger
Manufacturer codeFTI138RSUT
Power supply400 V, three-phase, 50 Hz
Motor power1.6 kW (2.2 hp)
Outputup to 500 kg/h
Screw speed140 rpm
Plate and knife systemUnger #32
Plate diameter98 mm
Feed openingØ 52 mm
Knives and plates supplied2 double-edged knives; 3 plates (pre-cutter, 10 mm and 6 mm)
Mincing headAISI 304 stainless steel
Reverse functionoptional extra (FINV)
Motorasynchronous, fan-cooled, with thermal protection
Drivehardened steel gears in a sealed oil-bath gearbox
Control voltage24 V
Bodypolished stainless steel
Tray and hopperstainless steel
Dimensions (W × D × H)215 × 480 × 430 mm
Packed dimensions430 × 620 × 650 mm
Net weight40 kg
Gross weight43 kg
ComplianceCE
Country of originItaly
Meat mincer
Manufacturer „Fama Industrie“
Model TI 32 RS Unger
Manufacturer code FTI138RSUT
Power supply 400 V, three-phase, 50 Hz
Motor power 1.6 kW (2.2 hp)
Output up to 500 kg/h
Screw speed 140 rpm
Plate and knife system Unger #32
Plate diameter 98 mm
Feed opening Ø 52 mm
Knives and plates supplied 2 double-edged knives; 3 plates (pre-cutter, 10 mm and 6 mm)
Mincing head AISI 304 stainless steel
Reverse function optional extra (FINV)
Motor asynchronous, fan-cooled, with thermal protection
Drive hardened steel gears in a sealed oil-bath gearbox
Control voltage 24 V
Body polished stainless steel
Tray and hopper stainless steel
Dimensions (W × D × H) 215 × 480 × 430 mm
Packed dimensions 430 × 620 × 650 mm
Net weight 40 kg
Gross weight 43 kg
Compliance CE
Country of origin Italy
Manufacturer product page: Open manufacturer page

Write your review

Manufacturer:
Fama Industrie
Code:
FTI138RSUT
1,577.52 € (Excl. VAT)
Options